| X-Axis Travel | 27”(685 mm) |
| Y-Axis Travel | 15”(381 mm) |
| Z-Axis Travel | 6 ½”(165 mm) |
| Motor Power (30 min, duty rating) | n/a |
| Maximum Load | n/a |
| X Axis Travel | 40” (1020 mm) |
| Y Axis Travel | 20” (510 mm) |
| Z Axis Travel | 22” (560 mm) |
| Motor (30 min rating, 50% ED) | n/a |
| Maximum Load (uniform distribution) | 1100 lb. (500 kg.) |
| Cross Slide (X) Travel | 11”(280 mm) |
| Carriage (Z) Travel | 32”(812 mm) |
| Quill Diameter | 2 15/16”(75 mm) |
| Quill Taper | #5 MT(#5 MT) |
| Quill Travel | 7”(175 mm) |
| X Axis Travel | 40”(1,016 mm - Opt. 1,270 mm) |
| Y Axis Travel | 24”(609 mm) |
| Z Axis Travel | 23”(584 mm) |
| Motor (peak) | 21.5 HP(15 kW) |
| Maximum Load | 4,500 lb.(2,041 kg) |
| X-Axis | 47.2\"(1200mm) |
| Y-Axis | 80.7\"(2050mm) |
| Z-Axis | 27.6\"(700mm) |
| Spindle Motor | 14.8/20.1 HP(11 / 15 kW) |
| Maximum Load | 4,400 lbs(2000 Kg) |
| Column Longitudinal | 157 ½”(4,000 mm) |
| Saddle Cross | 23 5/8”(600 mm) |
| Head Vertical | 21 5/8”(550 mm) |
| Spindle Motor FANUC (Standard) | 15 HP MTR(11 kW MTR) |
| Maximum Load on Table | 2,205 lb.(1,000 kg) |
| Column Longitudinal | 118”(3,000 mm) |
| Saddle Cross | 23 5/8”(600 mm) |
| Head Vertical | 21 5/8”(550 mm) |
| Spindle Motor FANUC (Standard) | 15 HP MTR(11 kW) |
| Maximum Load on Table | 5,511 lb.(2,500 kg) |
| Column Longitudinal | 27 1/2”(700 mm) |
| Saddle Cross | 27 1/2”(700 mm) |
| Head Vertical | 21 1/4”(540 mm) |
| Spindle Motor FANUC (Standard) | n/a |
| Maximum Load on Table | n/a |
| Column Longitudinal | 24”(610 mm) |
| Saddle Cross | 16”(410 mm) |
| Head Vertical | 22 1/2”(570 mm) |
| Spindle Motor FANUC (Standard) | n/a |
| Maximum Load on Table | n/a |
| Column Longitudinal | 157 1/2”(4,000 mm) |
| Saddle Cross | 157 1/2”(4,000 mm) |
| Head Vertical | 19 1/2”(800 mm) |
| Spindle Motor FANUC (Standard) | n/a |
| Maximum Load on Table | 88,185 lb.(40,000 kg) |
Republic Lagun
800 Sprucelake Drive
Harbor City, CA 90710
Phone: (310) 549-1610
Toll Free: (800) 421-2107
Fax: (310) 549-1613
Republic Lagun CNC Company was founded in 1979 and is located in Harbor City, California. Our CNC Milling Machines, CNC Lathes and CNC Machining Centers are in use worldwide.
 |
 |
 |