| X Axis Travel | 63”(1600 mm) |
| Y Axis Travel | 31.5”(800 mm) |
| Z Axis Travel | 30” (770 mm) |
| Motor (30 min rating, 50% ED) | n/a |
| Maximum Load (uniform distribution) | 4,500 lb.(2,041 kg) |
| Swing Over Bed | 21”(530 mm) |
| Swing Over Gap (Length 9") | n/a |
| Distance Between Centers | 40”(1,015 mm) |
| Main Motor | 20 HP AC(15 kW) |
| Programmable Spindle Speed | 25-2,000 RPM(25-2,000 RPM) |
| Column Longitudinal | 236”(6,000 mm) |
| Saddle Cross | 23 5/8”(600 mm) |
| Head Vertical | 21 5/8”(550 mm) |
| Spindle Motor FANUC (Standard) | 15 HP MTR(11 kW) |
| Maximum Load on Table | 5,511 lb.(2500 kg) |
| Column Longitudinal | 236”(6,000 mm) |
| Saddle Cross | 23 5/8”(600 mm) |
| Head Vertical | 21 5/8”(550 mm) |
| Spindle Motor FANUC (Standard) | 15 HP MTR(11 kW MTR) |
| Maximum Load on Table | 2,205 lb.(1,000 kg) |
| Column Longitudinal | 31 1/2”(800 mm) |
| Saddle Cross | 24”(610 mm) |
| Head Vertical | 23 1/2”(600 mm) |
| Spindle Motor FANUC (Standard) | n/a |
| Maximum Load on Table | n/a |
Republic Lagun
800 Sprucelake Drive
Harbor City, CA 90710
Phone: (310) 549-1610
Toll Free: (800) 421-2107
Fax: (310) 549-1613
Republic Lagun CNC Company was founded in 1979 and is located in Harbor City, California. Our CNC Milling Machines, CNC Lathes and CNC Machining Centers are in use worldwide.
 |
 |
 |