FEATURED PRODUCT
VMC 4824-SE Vertical Machining Center
IN STOCK and READY TO SHIP
Our VMC 4824-SE with Anilam 6000 Control System is IN-STOCK and READY FOR DELIVERY, qualifying for our $1,650 USD accessories promotion. The VMC 4824-SE features include:
- Exceptional 24" Y-axis expanded travel - provides 20% more capacity
- This 16,500 lbs. (7,700 kg.) Vertical Machining Center is the heaviest of its class
- This is the only machining center of its class equipped with Heidenhain® glass scales for X-Y axis positioning - no compensation required. The scales are self-purging on the Y-axis to avoid contamination.
- This machine has FOUR rectangular square box ways (not built with linear track bearings) that provide contact over a large surface area for maximum vibration damping and rigidity. The FOUR box ways are also hardened and ground with virtually friction-free Turcite® liners on all gibs and way surfaces and with full length lubrication over the way surface preserves accuracy, extending machine life eliminating machine stick slip.
|
- Pre-tensioned ball lead screws (supported both ends)
- Up to 2,200 lbs. (998 kg.) of tool clamping force.
- 4,500 lbs. (2,041 kg.) table load capacity
- 7,022 lbs. (3,185 kg.) peak (X, Y, & Z) axis thrust
- 653 ft-lbs. Peak (88 mm-kg.) maximum spindle torque @ 173 rpm.
- ABEC class 9 spindle bearings.
- 1,200 ipm (30 mpm) X & Y-axis rapid traverse.
- AC brushless digital servo drives.
- Every machine is laser verified , and ball bar tested/ total operating envelope
- Every machine is U.L. approved.
- 24 hour service response
|
For more information and specifications on this machine, please click here. If you are interested in this machine, please click here to get a quote and take advantage of our special promotion!

We've had the machine [VMC 4824] for four years and it's handled everything we've put on it. This machine has been the key to ACT's success.
Oscar Borello
Aerospace Commercial Tooling
Ontario, CA